TO ENSURE THAT THE NEXLAPTOP BUILT-IN WLAN CARD WORKS PROPERLY UNDER ELUXRL THE FOLLOWING STEPS MUST BE EXECUTED.

1.

Elux Firmware reset …Go into to the starter with CTRL+Windows keys and click on the  Setup/Firmware tabs. Click on the RESET button and then SAVE and REBOOT.

2.

In the bios under EXIT  select Set factory defaults

3.

In the bios under ADVANCED  set IDE Channel = disabled

4.

IMPORTANT: During boot keep eyes on Wlan LED indicator. Enable Wlan immediately with FN + F1 if it goes off.

Now, the NEXlaptop is ready and you can setup wlan in eLuxRL according to documentation.