TO ENSURE THAT THE NEXLAPTOP BUILT-IN WLAN CARD WORKS PROPERLY UNDER ELUXRL THE FOLLOWING STEPS MUST BE EXECUTED.
Elux Firmware reset …Go into to the starter with CTRL+Windows keys and click on the Setup/Firmware tabs. Click on the RESET button and then SAVE and REBOOT.
In the bios under EXIT select Set factory defaults
In the bios under ADVANCED set IDE Channel = disabled
IMPORTANT: During boot keep eyes on Wlan LED indicator. Enable Wlan immediately with FN + F1 if it goes off.
Now, the NEXlaptop is ready and you can setup wlan in eLuxRL according to documentation.